Automotive

Up until around 2016 or so, I primarily drove these quirky "Turbo Mopars" employing Chrysler's 2.2L turbocharged powertrain.  My last daily driver of this type was a 1986 Dodge Daytona Turbo Z C/S.  The car was a bit of a basket case when I got it, but it was eventually sorted out: the frame was straightened, the floor pans replaced, and the powertrain and interior were upgraded.  It was a very fun and comfortable car to drive (for a Turbo-Mopar anyway).  Eventually I had to let it go, as it just wasn't practical to use a 30+ year-old car as a daily.

My previous daily driver from 1995 through 2002 was a 1988 Dodge Shadow ES.  It was laid to rest due to a fatal case paint peel and floorpan/frame rust.  It had been in a few collisions over its life and it just wasn't worth saving.  Prior to that, I drove a 1987 Dodge Shadow Turbo and a 1987 Plymouth Sundance Turbo.  I had a thing for these particular cars (the "P-body", in Turbo-Mopar parlance), especially the first generation (1987-1988).

Back when I first graduated from college, I strongly desired the ultimate first-generation P-body: the 1987 Shelby CSX.  After some searching and waiting for the right car in my price range, I found Shelby CSX #694 of 750.  It has mainly been a project car, though it has had to step in as a daily from time to time.  This is the last of these cars that I still own.

Chrysler had an interesting relationship with Carroll Shelby in the late 1980s.  While the resulting vehicles were never taken very seriously in muscle car circles, a great online community did form around them.  The discourse has moved from mailing lists to online Forums to (unfortunately) Facebook Groups, but the community itself still exists.  The Shelby-Dodge Auto Club still holds an annual convention to this day.

In the dark recesses of the Internet lies an ancient tome of knowledge that (according to the server logs) people still visit for some reason: Mini-Mopar Resources.

The CSX: November 21, 2002

Posted on November 21, 2002.

With my Shadow now donating the rest of the parts I need, I have finally made some progress on the repairs.  Using my dad's handy hydraulic kit, I was able to push the underbody most of the way back...still needs a few tweaks though.  I test fitted the Shadow's bumper, just to make sure the frame wasn't tweaked at all.  It fit perfectly.  Looks like the restoration will have a happy ending.

The Shadow: October 24, 2002

Posted on October 24, 2002.

After almost exactly 2 months of neglect (one of those spent waiting for parts), I finally got the trans rebuilt and installed.  The rebuilt went well, once I broke down a bought the right tools.  If you are going to work on one of these, buy yourself a pair of snap-ring pliers with flat, knurled ends and a decent, small gear puller.  You'll be glad you did.  I bought both from Sears and they worked great.  The puller made quick work of the front (bell housing side) intermediate shaft bearing as well as the outer race in the extension housing and the pliers made quick work of those annoying snap rings.  The rest of the outer races came out with a hammer and punch.

The inner races are a bit more work, but aren't bad as long as you are careful.  Since there is nothing to grab with a puller, I opted to grind through the inner races most of the way with a Dremel, then hit it with a cold chisel and small sledge to crack it.  The race will slide right off...just be careful of flying bits of metal and be sure to use those fiberglass-reinforced cutoff wheels.  Also, if you opt to get the chome-moly bearing retainer plate, you MUST measure and adjust the input shaft preloading because it does not have the relief for the outer race of the rear input shaft bearing.  The instructions in the service manual are fairly straight-forward.  I opted for zero end play, since most of the input shafts on the transmissions I've worked on get sloppy shortly after a rebuild.

The new trans works great and it's nice having my old beater back.  Two months of paint peel has left the car looking as bad as ever, but it still goes like hell....

The CSX: October 12, 2002

Posted on October 12, 2002.

Thanks to our club's prez, Jason Trotter, I now have a tail light and that flimsy trim piece.  Now I just need a bumper support and struts.  I'm thinking of getting brand new struts from Mopar, since all the ones I've seen in the yard (and on my cars) are rusted pretty bad.

The CSX: September 29, 2002

Posted on September 29, 2002.

BAM! Some kid in his daddy's SUV rear-ended me today.  A few seconds after stopping for a red light, he hit me thinking I had gone through (it had just changed).  Just what I needed...another project.  The damage isn't too bad: collapsed bumper struts, bent bumper support, broken taillight, and the metal trim between the taillights and bumper is twisted up.  There is no other frame or body damage except for the underbody behind the right tail light.  That's going to need a bit of pushing.

The CSX: September 2, 2002

Posted on September 02, 2002.

Kudos to Dave Tekampe for helping me install the new suspension components.  The work wasn't too bad except for the control arm bushings.  Whatever stories you've heard about removing those suckers is true.  It's a chore getting the rubber out of the metal sleeve.  All the metal pieces need to be saved because the kit from energy suspension does not contain anything useful except for the rubber itself.  The rest of the bushings are fairly straight forward.  After some trial and error, we found that pushing out the center sleeve with a large bolt, followed the rubber works best.  There's no need to push the outer sleeve out of the control arm.  Of course, he had access to an arbor press....

Anyway, the CSX now has new Koni struts and shocks (including KYB strut mounts, etc), new Energy Suspension polyurethane control arm and sway bar bushings, and new lower ball joints.  The car handles wonderfully now, compared to before, even with the eye-balled alignment and shot tires.  Those are next on the list.