Automotive

Up until around 2016 or so, I primarily drove these quirky "Turbo Mopars" employing Chrysler's 2.2L turbocharged powertrain.  My last daily driver of this type was a 1986 Dodge Daytona Turbo Z C/S.  The car was a bit of a basket case when I got it, but it was eventually sorted out: the frame was straightened, the floor pans replaced, and the powertrain and interior were upgraded.  It was a very fun and comfortable car to drive (for a Turbo-Mopar anyway).  Eventually I had to let it go, as it just wasn't practical to use a 30+ year-old car as a daily.

My previous daily driver from 1995 through 2002 was a 1988 Dodge Shadow ES.  It was laid to rest due to a fatal case paint peel and floorpan/frame rust.  It had been in a few collisions over its life and it just wasn't worth saving.  Prior to that, I drove a 1987 Dodge Shadow Turbo and a 1987 Plymouth Sundance Turbo.  I had a thing for these particular cars (the "P-body", in Turbo-Mopar parlance), especially the first generation (1987-1988).

Back when I first graduated from college, I strongly desired the ultimate first-generation P-body: the 1987 Shelby CSX.  After some searching and waiting for the right car in my price range, I found Shelby CSX #694 of 750.  It has mainly been a project car, though it has had to step in as a daily from time to time.  This is the last of these cars that I still own.

Chrysler had an interesting relationship with Carroll Shelby in the late 1980s.  While the resulting vehicles were never taken very seriously in muscle car circles, a great online community did form around them.  The discourse has moved from mailing lists to online Forums to (unfortunately) Facebook Groups, but the community itself still exists.  The Shelby-Dodge Auto Club still holds an annual convention to this day.

In the dark recesses of the Internet lies an ancient tome of knowledge that (according to the server logs) people still visit for some reason: Mini-Mopar Resources.

The CSX: July 7, 2000

Posted on July 07, 2000.

After dealing with all kinds of problems with paint on that fender, I finally got the car ready.  The doors are back together and everything is installed.  One of the power door lock motors was frozen, so I will have to find another.  I even had time to paint the upper door trim and the mirrors to match the new lower trim pieces a bit better.  I also resealed the valve cover and got the A/C working (just this evening).  All I need to do is wash the car tomorrow and take off!

The CSX: June 16, 2000

Posted on June 16, 2000.

The car has been sitting for a very long time.  I started working on the rust on the left, front fender a few weeks ago.  The Shelby Dodge Automobile Convention 10 is coming up in July 8, so I am starting a campaign to get the car ready.  I need to get the power window and door lock motors installed, as well as the power mirrors (the doors are already taken apart).  I also need to replace the weather stripping along the bottom of the door windows.  Mechanically, the car is sound.  I would like to have air conditioning for the trip as well, so I will pull the A/C heater unit to flush the crud out of the evaporator coil (the compressor was rusting, internally).  I will replace the plugged heater core while it is out.

I've signed-up for all the events, which includes a performance driving school and drag racing.  I won't bother with the car shows.  :) The car is going to take a beating, so hopefully it will be able to make the trip there and back.

The Shadow: April 2, 2000

Posted on April 02, 2000.

I installed the Conquest intercooler into the Shadow with some clever plumbing to keep the BOV.  I upped to boost to 14psi and the car makes lots of power now.  Performance-wise, the car is right where I want it.

I also dumped the disintegrating 1988 shifter and replaced it with the '87 unit from the CSX (which has an A568 now).  I also moved the pivot point up on the shifter arm for the cable.  This shortened the throw of the shifter considerably.  I made new end boots for the cables out of bicycle tire tubes and flushed the cables with 100% silicone lubricant.  I also tightened all the nuts on the shifter itself.  All of this has made the most solid shifter I have ever felt.  It actually feels like a rod shifter.  I adjusted the cables to bring the shifter planes as close to the driver as possible.  If this tranny didn't shift like a truck tranny, the whole setup would be awesome.  Now the A568 feels more sloppy than the A520.  :-)

The Shadow: March 6, 2000

Posted on March 06, 2000.

I picked-up a used hood from MoparChad to replace the bent one.  I also got some power window and door lock motors off of the same car.  The parts car was pretty rough, otherwise.  The Shadow looks a lot better now, though the "new" hood needs quite a bit of work...at least it's straight.

The Shadow: November 1, 1999

Posted on November 01, 1999.

Well I took the old hood off, threw it in the grass, and started jumping on it to straighten it out.  After that and some work with pliers and wooden block, the hood was straight enough to close.  The Shadow is now back as my driver, though it looks pretty shabby from the front.