Automotive

The Daytona: May 27, 2003

I think I have decided what paints I am going to use.  In the interest of not having to worry about rusting under the primer, I will take the body down to metal, spray with POR-15 clear, POR-15 tie-coat primer, and PPG color and clear coats.  The underbody and fenders will get the POR-15 underbody treatment in semigloss black.  That should intomb the metal for all eternity.  I also need to think about how I am going to weld in the plates to patch up the underbody and straighten-out the front end.  At the moment, the driver's side door is partially stripped and the rear end is in the air so that I can investigate the squeaky brakes and bleed the lines.  As usual, the bleeders snapped off when I tried to remove them, so hopefully I will be able to extract them.  If not, new cylinders are only $15.